Non-towered · Class E surface area
Rocky Mount/Wilson Regional (KRWI) radio calls
Rocky Mount, NCICAO KRWI · FAA RWI
Rocky Mount/Wilson Regional is a non-towered airport in Rocky Mount, NC. Nobody clears you to do anything: you self-announce on the CTAF, 123.05, as Rocky Mount/Wilson Regional Traffic, with the airport name at the start and end of each call.
The airport has a Class E surface area: no radio requirement to enter, but VFR weather minimums apply to the surface. Published hours: CLASS E SVC 0800-1800; OTHER TIMES CLASS G.
Frequencies
| CTAFRocky Mount/Wilson Regional Traffic | 123.05 |
|---|
Airport
- Runways
- 04 · 22
- Elevation
- 158 ft
- Position
- 35.856, -77.892
Non-towered airport: self-announce on the CTAF
Sample calls at KRWI
Rocky Mount/Wilson Regional has no operating control tower. Every call below goes out on the CTAF, 123.05, to the other aircraft, not to a controller. The runway shown is 04; use whichever runway the wind and the traffic dictate on the day.
The aircraft is the AIM’s own example, Cessna Three One Six Zero Foxtrot; the squawk codes, altitudes and headings are illustrative. Frequencies, station names and runway numbers are this airport’s, from the FAA data.
- Tune 123.05. Nobody clears you; you announce and you listen. The airport name goes at the start and the end of every call, and the runway is always a number, never "the active" (AIM 4-1-9 g 8).
- YouRocky Mount/Wilson Regional traffic, Cessna Three One Six Zero Foxtrot, taxiing to runway zero four, Rocky Mount/Wilson Regional.
- YouRocky Mount/Wilson Regional traffic, Cessna Six Zero Foxtrot, departing runway zero four, departing the pattern to the north, Rocky Mount/Wilson Regional.
- Announce until you are about 10 miles out; on the way back, start announcing at 10 miles (AIM 4-1-9 c 1, TBL 4-1-1).
- YouRocky Mount/Wilson Regional traffic, Cessna Three One Six Zero Foxtrot, one zero miles south, two thousand five hundred, landing Rocky Mount/Wilson Regional, Rocky Mount/Wilson Regional.
- YouRocky Mount/Wilson Regional UNICOM, Cessna Six Zero Foxtrot, one zero miles south, request wind and runway information, Rocky Mount/Wilson Regional.
- A UNICOM operator, if one is on, answers with the wind and the runway in use (AIM 4-1-9 h). If nobody answers, choose the runway from the wind and the pattern traffic you can hear.
- YouRocky Mount/Wilson Regional traffic, Cessna Six Zero Foxtrot, entering left downwind runway zero four, full stop, Rocky Mount/Wilson Regional.
- YouRocky Mount/Wilson Regional traffic, Cessna Six Zero Foxtrot, left base runway zero four, Rocky Mount/Wilson Regional.
- YouRocky Mount/Wilson Regional traffic, Cessna Six Zero Foxtrot, final runway zero four, full stop, Rocky Mount/Wilson Regional.
- YouRocky Mount/Wilson Regional traffic, Cessna Six Zero Foxtrot, clear of runway zero four, Rocky Mount/Wilson Regional.
If things change. Do not use "any traffic in the area, please advise"; the AIM says it is not to be used under any condition (AIM 4-1-9 g 1). Listen for ten miles before you arrive; most of what you want to know has already been said.
Phraseology from AIM 4-1-9 c 1, g 1, g 8, h; TBL 4-1-1; 4-3-3. What TowerTalk grades against →
The calls you will make here
Nearby in North Carolina
- W03Wilson Industrial Air Centernon-towered
- KETCTarboro-Edgecombenon-towered
- KLHZTriangle North Executivenon-towered
- KGWWWayne Executive Jetportnon-towered
- N08Flanagan Fieldnon-towered
- KPGVPitt-Greenvillenon-towered
Frequencies, runways and airspace from the FAA National Airspace System Resources (NASR) 28-day subscription, cycle effective Oct 29, 2026. Training use only. Always verify against a current Chart Supplement and sectional chart before flight; frequencies change. TowerTalk is not affiliated with the FAA. Report a discrepancy.