Non-towered · Class G at the surface
Grand Marais/Cook County (KCKC) radio calls
Grand Marais, MNICAO KCKC · FAA CKC
Grand Marais/Cook County is a non-towered airport in Grand Marais, MN. Nobody clears you to do anything: you self-announce on the CTAF, 122.8, as Grand Marais/Cook County Traffic, with the airport name at the start and end of each call.
No Class B, C, D or E surface area is designated for this airport in the FAA data, so the airspace at the surface is Class G.
Frequencies
| CTAFGrand Marais/Cook County Traffic | 122.8 |
|---|
Airport
- Runways
- 10 · 28
- Elevation
- 1,803 ft
- Position
- 47.838, -90.385
Non-towered airport: self-announce on the CTAF
Sample calls at KCKC
Grand Marais/Cook County has no operating control tower. Every call below goes out on the CTAF, 122.8, to the other aircraft, not to a controller. The runway shown is 10; use whichever runway the wind and the traffic dictate on the day.
The aircraft is the AIM’s own example, Cessna Three One Six Zero Foxtrot; the squawk codes, altitudes and headings are illustrative. Frequencies, station names and runway numbers are this airport’s, from the FAA data.
- Tune 122.8. Nobody clears you; you announce and you listen. The airport name goes at the start and the end of every call, and the runway is always a number, never "the active" (AIM 4-1-9 g 8).
- YouGrand Marais/Cook County traffic, Cessna Three One Six Zero Foxtrot, taxiing to runway one zero, Grand Marais/Cook County.
- YouGrand Marais/Cook County traffic, Cessna Six Zero Foxtrot, departing runway one zero, departing the pattern to the north, Grand Marais/Cook County.
- Announce until you are about 10 miles out; on the way back, start announcing at 10 miles (AIM 4-1-9 c 1, TBL 4-1-1).
- YouGrand Marais/Cook County traffic, Cessna Three One Six Zero Foxtrot, one zero miles south, two thousand five hundred, landing Grand Marais/Cook County, Grand Marais/Cook County.
- YouGrand Marais/Cook County UNICOM, Cessna Six Zero Foxtrot, one zero miles south, request wind and runway information, Grand Marais/Cook County.
- A UNICOM operator, if one is on, answers with the wind and the runway in use (AIM 4-1-9 h). If nobody answers, choose the runway from the wind and the pattern traffic you can hear.
- YouGrand Marais/Cook County traffic, Cessna Six Zero Foxtrot, entering left downwind runway one zero, full stop, Grand Marais/Cook County.
- YouGrand Marais/Cook County traffic, Cessna Six Zero Foxtrot, left base runway one zero, Grand Marais/Cook County.
- YouGrand Marais/Cook County traffic, Cessna Six Zero Foxtrot, final runway one zero, full stop, Grand Marais/Cook County.
- YouGrand Marais/Cook County traffic, Cessna Six Zero Foxtrot, clear of runway one zero, Grand Marais/Cook County.
If things change. Do not use "any traffic in the area, please advise"; the AIM says it is not to be used under any condition (AIM 4-1-9 g 1). Listen for ten miles before you arrive; most of what you want to know has already been said.
Phraseology from AIM 4-1-9 c 1, g 1, g 8, h; TBL 4-1-1; 4-3-3. What TowerTalk grades against →
The calls you will make here
Nearby in Minnesota
- KBFWSilver Bay Municipalnon-towered
- KELOEly Municipalnon-towered
- KTWMRichard b Helgesonnon-towered
- 12DTower Municipalnon-towered
- KEVMEveleth/Virginia Municipalnon-towered
- KCQMCook Municipalnon-towered
Frequencies, runways and airspace from the FAA National Airspace System Resources (NASR) 28-day subscription, cycle effective Sep 3, 2026. Training use only. Always verify against a current Chart Supplement and sectional chart before flight; frequencies change. TowerTalk is not affiliated with the FAA. Report a discrepancy.
This page is in release tier 2 and is not yet submitted to search engines.
