Non-towered · Class G at the surface

Pine Hill (9G6) radio calls

Albion, NYFAA identifier 9G6; no ICAO code assigned

Pine Hill is a non-towered airport in Albion, NY. Nobody clears you to do anything: you self-announce on the CTAF, 123.0, as Pine Hill Traffic, with the airport name at the start and end of each call. The approach control for the area is Buffalo Approach on 126.15, which is who you call for VFR flight following.

No Class B, C, D or E surface area is designated for this airport in the FAA data, so the airspace at the surface is Class G.

Frequencies

CTAFPine Hill Traffic123.0
Approach / DepartureBuffalo Approach126.15

Airport

Runways
10 · 28
Elevation
669 ft
Pattern altitude
1,500 ft MSL (published TPA)
Position
43.174, -78.275

Non-towered airport: self-announce on the CTAF

Sample calls at 9G6

Pine Hill has no operating control tower. Every call below goes out on the CTAF, 123.0, to the other aircraft, not to a controller. The runway shown is 10; use whichever runway the wind and the traffic dictate on the day.

The aircraft is the AIM’s own example, Cessna Three One Six Zero Foxtrot; the squawk codes, altitudes and headings are illustrative. Frequencies, station names and runway numbers are this airport’s, from the FAA data.

  1. Tune 123.0. Nobody clears you; you announce and you listen. The airport name goes at the start and the end of every call, and the runway is always a number, never "the active" (AIM 4-1-9 g 8).
  2. YouPine Hill traffic, Cessna Three One Six Zero Foxtrot, taxiing to runway one zero, Pine Hill.
  3. YouPine Hill traffic, Cessna Six Zero Foxtrot, departing runway one zero, departing the pattern to the north, Pine Hill.
  4. Announce until you are about 10 miles out; on the way back, start announcing at 10 miles (AIM 4-1-9 c 1, TBL 4-1-1).
  5. YouPine Hill traffic, Cessna Three One Six Zero Foxtrot, one zero miles south, two thousand five hundred, landing Pine Hill, Pine Hill.
  6. YouPine Hill UNICOM, Cessna Six Zero Foxtrot, one zero miles south, request wind and runway information, Pine Hill.
  7. A UNICOM operator, if one is on, answers with the wind and the runway in use (AIM 4-1-9 h). If nobody answers, choose the runway from the wind and the pattern traffic you can hear.
  8. YouPine Hill traffic, Cessna Six Zero Foxtrot, entering left downwind runway one zero, full stop, Pine Hill.
  9. YouPine Hill traffic, Cessna Six Zero Foxtrot, left base runway one zero, Pine Hill.
  10. YouPine Hill traffic, Cessna Six Zero Foxtrot, final runway one zero, full stop, Pine Hill.
  11. YouPine Hill traffic, Cessna Six Zero Foxtrot, clear of runway one zero, Pine Hill.

If things change. Want flight following after departure? Call Buffalo Approach on 126.15 once clear of the pattern: identification, type, position, altitude, destination, "request VFR flight following" (AIM 4-1-18 a 3). Do not use "any traffic in the area, please advise"; the AIM says it is not to be used under any condition (AIM 4-1-9 g 1).

Phraseology from AIM 4-1-9 c 1, g 1, g 8, h; TBL 4-1-1; 4-3-3. What TowerTalk grades against →

The calls you will make here

Nearby in New York

Frequencies, runways and airspace from the FAA National Airspace System Resources (NASR) 28-day subscription, cycle effective Oct 29, 2026. Training use only. Always verify against a current Chart Supplement and sectional chart before flight; frequencies change. TowerTalk is not affiliated with the FAA. Report a discrepancy.

This page is in release tier 3 and is not yet submitted to search engines.