Non-towered · Class G at the surface
Richard Arthur Field (M95) radio calls
Fayette, ALFAA identifier M95; no ICAO code assigned
Richard Arthur Field is a non-towered airport in Fayette, AL. Nobody clears you to do anything: you self-announce on the CTAF, 122.8, as Richard Arthur Field Traffic, with the airport name at the start and end of each call. The approach control for the area is Columbus Approach on 126.075, which is who you call for VFR flight following.
No Class B, C, D or E surface area is designated for this airport in the FAA data, so the airspace at the surface is Class G.
Frequencies
| CTAFRichard Arthur Field Traffic | 122.8 |
|---|---|
| Approach / DepartureColumbus Approach | 126.075 |
Airport
- Runways
- 01 · 19
- Elevation
- 357 ft
- Position
- 33.709, -87.815
Non-towered airport: self-announce on the CTAF
Sample calls at M95
Richard Arthur Field has no operating control tower. Every call below goes out on the CTAF, 122.8, to the other aircraft, not to a controller. The runway shown is 01; use whichever runway the wind and the traffic dictate on the day.
The aircraft is the AIM’s own example, Cessna Three One Six Zero Foxtrot; the squawk codes, altitudes and headings are illustrative. Frequencies, station names and runway numbers are this airport’s, from the FAA data.
- Tune 122.8. Nobody clears you; you announce and you listen. The airport name goes at the start and the end of every call, and the runway is always a number, never "the active" (AIM 4-1-9 g 8).
- YouRichard Arthur Field traffic, Cessna Three One Six Zero Foxtrot, taxiing to runway zero one, Richard Arthur Field.
- YouRichard Arthur Field traffic, Cessna Six Zero Foxtrot, departing runway zero one, departing the pattern to the north, Richard Arthur Field.
- Announce until you are about 10 miles out; on the way back, start announcing at 10 miles (AIM 4-1-9 c 1, TBL 4-1-1).
- YouRichard Arthur Field traffic, Cessna Three One Six Zero Foxtrot, one zero miles south, two thousand five hundred, landing Richard Arthur Field, Richard Arthur Field.
- YouRichard Arthur Field UNICOM, Cessna Six Zero Foxtrot, one zero miles south, request wind and runway information, Richard Arthur Field.
- A UNICOM operator, if one is on, answers with the wind and the runway in use (AIM 4-1-9 h). If nobody answers, choose the runway from the wind and the pattern traffic you can hear.
- YouRichard Arthur Field traffic, Cessna Six Zero Foxtrot, entering left downwind runway zero one, full stop, Richard Arthur Field.
- YouRichard Arthur Field traffic, Cessna Six Zero Foxtrot, left base runway zero one, Richard Arthur Field.
- YouRichard Arthur Field traffic, Cessna Six Zero Foxtrot, final runway zero one, full stop, Richard Arthur Field.
- YouRichard Arthur Field traffic, Cessna Six Zero Foxtrot, clear of runway zero one, Richard Arthur Field.
If things change. Want flight following after departure? Call Columbus Approach on 126.075 once clear of the pattern: identification, type, position, altitude, destination, "request VFR flight following" (AIM 4-1-18 a 3). Do not use "any traffic in the area, please advise"; the AIM says it is not to be used under any condition (AIM 4-1-9 g 1).
Phraseology from AIM 4-1-9 c 1, g 1, g 8, h; TBL 4-1-1; 4-3-3. What TowerTalk grades against →
The calls you will make here
Nearby in Alabama
- M55Lamar Countynon-towered
- 3M8North Pickensnon-towered
- KHABMarion County-Rankin Fitenon-towered
- KJFXWalker County/Bevill Fieldnon-towered
- KTCLTuscaloosa Ntltowered
- 1M4Posey Fieldnon-towered
Frequencies, runways and airspace from the FAA National Airspace System Resources (NASR) 28-day subscription, cycle effective Sep 3, 2026. Training use only. Always verify against a current Chart Supplement and sectional chart before flight; frequencies change. TowerTalk is not affiliated with the FAA. Report a discrepancy.
This page is in release tier 2 and is not yet submitted to search engines.
