Non-towered · Class G at the surface
Richmond County (KRCZ) radio calls
Rockingham, NCICAO KRCZ · FAA RCZ
Richmond County is a non-towered airport in Rockingham, NC. Nobody clears you to do anything: you self-announce on the CTAF, 122.8, as Richmond County Traffic, with the airport name at the start and end of each call. The approach control for the area is Fayetteville Approach on 127.8, which is who you call for VFR flight following.
No Class B, C, D or E surface area is designated for this airport in the FAA data, so the airspace at the surface is Class G.
Frequencies
| CTAFRichmond County Traffic | 122.8 |
|---|---|
| Approach / DepartureFayetteville Approach | 127.8 |
Airport
- Runways
- 04 · 22 · 14 · 32
- Elevation
- 358 ft
- Position
- 34.891, -79.760
Non-towered airport: self-announce on the CTAF
Sample calls at KRCZ
Richmond County has no operating control tower. Every call below goes out on the CTAF, 122.8, to the other aircraft, not to a controller. The runway shown is 04; use whichever runway the wind and the traffic dictate on the day.
The aircraft is the AIM’s own example, Cessna Three One Six Zero Foxtrot; the squawk codes, altitudes and headings are illustrative. Frequencies, station names and runway numbers are this airport’s, from the FAA data.
- Tune 122.8. Nobody clears you; you announce and you listen. The airport name goes at the start and the end of every call, and the runway is always a number, never "the active" (AIM 4-1-9 g 8).
- YouRichmond County traffic, Cessna Three One Six Zero Foxtrot, taxiing to runway zero four, Richmond County.
- YouRichmond County traffic, Cessna Six Zero Foxtrot, departing runway zero four, departing the pattern to the north, Richmond County.
- Announce until you are about 10 miles out; on the way back, start announcing at 10 miles (AIM 4-1-9 c 1, TBL 4-1-1).
- YouRichmond County traffic, Cessna Three One Six Zero Foxtrot, one zero miles south, two thousand five hundred, landing Richmond County, Richmond County.
- YouRichmond County UNICOM, Cessna Six Zero Foxtrot, one zero miles south, request wind and runway information, Richmond County.
- A UNICOM operator, if one is on, answers with the wind and the runway in use (AIM 4-1-9 h). If nobody answers, choose the runway from the wind and the pattern traffic you can hear.
- YouRichmond County traffic, Cessna Six Zero Foxtrot, entering left downwind runway zero four, full stop, Richmond County.
- YouRichmond County traffic, Cessna Six Zero Foxtrot, left base runway zero four, Richmond County.
- YouRichmond County traffic, Cessna Six Zero Foxtrot, final runway zero four, full stop, Richmond County.
- YouRichmond County traffic, Cessna Six Zero Foxtrot, clear of runway zero four, Richmond County.
If things change. Want flight following after departure? Call Fayetteville Approach on 127.8 once clear of the pattern: identification, type, position, altitude, destination, "request VFR flight following" (AIM 4-1-18 a 3). Do not use "any traffic in the area, please advise"; the AIM says it is not to be used under any condition (AIM 4-1-9 g 1).
Phraseology from AIM 4-1-9 c 1, g 1, g 8, h; TBL 4-1-1; 4-3-3. What TowerTalk grades against →
The calls you will make here
Nearby in North Carolina
- N26Derby Aerodromenon-towered
- KAFPAnson County/Jeff Cloud Fieldnon-towered
- KMEBLaurinburg/Maxtonnon-towered
- KSOPMoore Countynon-towered
- 5W4p k Airparknon-towered
- 43AMontgomery Countynon-towered
Frequencies, runways and airspace from the FAA National Airspace System Resources (NASR) 28-day subscription, cycle effective Sep 3, 2026. Training use only. Always verify against a current Chart Supplement and sectional chart before flight; frequencies change. TowerTalk is not affiliated with the FAA. Report a discrepancy.
This page is in release tier 2 and is not yet submitted to search engines.