TowerTalk logoTowerTalk
Start training

Non-towered · Class G at the surface

Shelby County (KEET) radio calls

Alabaster, ALICAO KEET · FAA EET

Shelby County is a non-towered airport in Alabaster, AL. Nobody clears you to do anything: you self-announce on the CTAF, 122.7, as Shelby County Traffic, with the airport name at the start and end of each call. The approach control for the area is Birmingham Approach on 123.8, which is who you call for VFR flight following.

No Class B, C, D or E surface area is designated for this airport in the FAA data, so the airspace at the surface is Class G.

Frequencies

Clearance Delivery121.725
CTAFShelby County Traffic122.7
Approach / DepartureBirmingham Approach123.8

Airport

Runways
16 · 34
Right-hand pattern
Runway 34
Elevation
586 ft
Position
33.178, -86.783

Non-towered airport: self-announce on the CTAF

Sample calls at KEET

Shelby County has no operating control tower. Every call below goes out on the CTAF, 122.7, to the other aircraft, not to a controller. The runway shown is 16; use whichever runway the wind and the traffic dictate on the day.

The aircraft is the AIM’s own example, Cessna Three One Six Zero Foxtrot; the squawk codes, altitudes and headings are illustrative. Frequencies, station names and runway numbers are this airport’s, from the FAA data.

  1. Tune 122.7. Nobody clears you; you announce and you listen. The airport name goes at the start and the end of every call, and the runway is always a number, never "the active" (AIM 4-1-9 g 8).
  2. YouShelby County traffic, Cessna Three One Six Zero Foxtrot, taxiing to runway one six, Shelby County.
  3. YouShelby County traffic, Cessna Six Zero Foxtrot, departing runway one six, departing the pattern to the north, Shelby County.
  4. Announce until you are about 10 miles out; on the way back, start announcing at 10 miles (AIM 4-1-9 c 1, TBL 4-1-1).
  5. YouShelby County traffic, Cessna Three One Six Zero Foxtrot, one zero miles south, two thousand five hundred, landing Shelby County, Shelby County.
  6. YouShelby County UNICOM, Cessna Six Zero Foxtrot, one zero miles south, request wind and runway information, Shelby County.
  7. A UNICOM operator, if one is on, answers with the wind and the runway in use (AIM 4-1-9 h). If nobody answers, choose the runway from the wind and the pattern traffic you can hear.
  8. YouShelby County traffic, Cessna Six Zero Foxtrot, entering left downwind runway one six, full stop, Shelby County.
  9. YouShelby County traffic, Cessna Six Zero Foxtrot, left base runway one six, Shelby County.
  10. YouShelby County traffic, Cessna Six Zero Foxtrot, final runway one six, full stop, Shelby County.
  11. YouShelby County traffic, Cessna Six Zero Foxtrot, clear of runway one six, Shelby County.

If things change. Want flight following after departure? Call Birmingham Approach on 123.8 once clear of the pattern: identification, type, position, altitude, destination, "request VFR flight following" (AIM 4-1-18 a 3). Do not use "any traffic in the area, please advise"; the AIM says it is not to be used under any condition (AIM 4-1-9 g 1).

Phraseology from AIM 4-1-9 c 1, g 1, g 8, h; TBL 4-1-1; 4-3-3. What TowerTalk grades against →

The calls you will make here

Nearby in Alabama

Frequencies, runways and airspace from the FAA National Airspace System Resources (NASR) 28-day subscription, cycle effective Oct 29, 2026. Training use only. Always verify against a current Chart Supplement and sectional chart before flight; frequencies change. TowerTalk is not affiliated with the FAA. Report a discrepancy.