Non-towered · Class G at the surface
Gene Snyder (K62) radio calls
Falmouth, KYFAA identifier K62; no ICAO code assigned
Gene Snyder is a non-towered airport in Falmouth, KY. Nobody clears you to do anything: you self-announce on the CTAF, 122.7, as Gene Snyder Traffic, with the airport name at the start and end of each call. The approach control for the area is Cincinnati Approach on 121.0, which is who you call for VFR flight following.
No Class B, C, D or E surface area is designated for this airport in the FAA data, so the airspace at the surface is Class G.
Frequencies
| CTAFGene Snyder Traffic | 122.7 |
|---|---|
| Approach / DepartureCincinnati Approach | 121.0 |
Airport
- Runways
- 03 · 21
- Elevation
- 900 ft
- Position
- 38.704, -84.392
Non-towered airport: self-announce on the CTAF
Sample calls at K62
Gene Snyder has no operating control tower. Every call below goes out on the CTAF, 122.7, to the other aircraft, not to a controller. The runway shown is 03; use whichever runway the wind and the traffic dictate on the day.
The aircraft is the AIM’s own example, Cessna Three One Six Zero Foxtrot; the squawk codes, altitudes and headings are illustrative. Frequencies, station names and runway numbers are this airport’s, from the FAA data.
- Tune 122.7. Nobody clears you; you announce and you listen. The airport name goes at the start and the end of every call, and the runway is always a number, never "the active" (AIM 4-1-9 g 8).
- YouGene Snyder traffic, Cessna Three One Six Zero Foxtrot, taxiing to runway zero three, Gene Snyder.
- YouGene Snyder traffic, Cessna Six Zero Foxtrot, departing runway zero three, departing the pattern to the north, Gene Snyder.
- Announce until you are about 10 miles out; on the way back, start announcing at 10 miles (AIM 4-1-9 c 1, TBL 4-1-1).
- YouGene Snyder traffic, Cessna Three One Six Zero Foxtrot, one zero miles south, two thousand five hundred, landing Gene Snyder, Gene Snyder.
- YouGene Snyder UNICOM, Cessna Six Zero Foxtrot, one zero miles south, request wind and runway information, Gene Snyder.
- A UNICOM operator, if one is on, answers with the wind and the runway in use (AIM 4-1-9 h). If nobody answers, choose the runway from the wind and the pattern traffic you can hear.
- YouGene Snyder traffic, Cessna Six Zero Foxtrot, entering left downwind runway zero three, full stop, Gene Snyder.
- YouGene Snyder traffic, Cessna Six Zero Foxtrot, left base runway zero three, Gene Snyder.
- YouGene Snyder traffic, Cessna Six Zero Foxtrot, final runway zero three, full stop, Gene Snyder.
- YouGene Snyder traffic, Cessna Six Zero Foxtrot, clear of runway zero three, Gene Snyder.
If things change. Want flight following after departure? Call Cincinnati Approach on 121.0 once clear of the pattern: identification, type, position, altitude, destination, "request VFR flight following" (AIM 4-1-18 a 3). Do not use "any traffic in the area, please advise"; the AIM says it is not to be used under any condition (AIM 4-1-9 g 1).
Phraseology from AIM 4-1-9 c 1, g 1, g 8, h; TBL 4-1-1; 4-3-3. What TowerTalk grades against →
The calls you will make here
Nearby in Kentucky
- 0I8Cynthiana-Harrison Countynon-towered
- KCVGCincinnati/Northern Kentucky Internationaltowered
- 8GKGallatin Countynon-towered
- 27KGeorgetown-Scott County Regionalnon-towered
- KFGXFleming-Masonnon-towered
- KFFTCapital Citynon-towered
Frequencies, runways and airspace from the FAA National Airspace System Resources (NASR) 28-day subscription, cycle effective Sep 3, 2026. Training use only. Always verify against a current Chart Supplement and sectional chart before flight; frequencies change. TowerTalk is not affiliated with the FAA. Report a discrepancy.
This page is in release tier 2 and is not yet submitted to search engines.
