Non-towered · Class G at the surface
Clinton Field (I66) radio calls
Wilmington, OHFAA identifier I66; no ICAO code assigned
Clinton Field is a non-towered airport in Wilmington, OH. Nobody clears you to do anything: you self-announce on the CTAF, 122.725, as Clinton Field Traffic, with the airport name at the start and end of each call. The approach control for the area is Columbus Approach on 118.85, which is who you call for VFR flight following.
No Class B, C, D or E surface area is designated for this airport in the FAA data, so the airspace at the surface is Class G.
Frequencies
| CTAFClinton Field Traffic | 122.725 |
|---|---|
| Approach / DepartureColumbus Approach | 118.85 |
Airport
- Runways
- 03 · 21
- Elevation
- 1,033 ft
- Position
- 39.502, -83.863
Non-towered airport: self-announce on the CTAF
Sample calls at I66
Clinton Field has no operating control tower. Every call below goes out on the CTAF, 122.725, to the other aircraft, not to a controller. The runway shown is 03; use whichever runway the wind and the traffic dictate on the day.
The aircraft is the AIM’s own example, Cessna Three One Six Zero Foxtrot; the squawk codes, altitudes and headings are illustrative. Frequencies, station names and runway numbers are this airport’s, from the FAA data.
- Tune 122.725. Nobody clears you; you announce and you listen. The airport name goes at the start and the end of every call, and the runway is always a number, never "the active" (AIM 4-1-9 g 8).
- YouClinton Field traffic, Cessna Three One Six Zero Foxtrot, taxiing to runway zero three, Clinton Field.
- YouClinton Field traffic, Cessna Six Zero Foxtrot, departing runway zero three, departing the pattern to the north, Clinton Field.
- Announce until you are about 10 miles out; on the way back, start announcing at 10 miles (AIM 4-1-9 c 1, TBL 4-1-1).
- YouClinton Field traffic, Cessna Three One Six Zero Foxtrot, one zero miles south, two thousand five hundred, landing Clinton Field, Clinton Field.
- YouClinton Field UNICOM, Cessna Six Zero Foxtrot, one zero miles south, request wind and runway information, Clinton Field.
- A UNICOM operator, if one is on, answers with the wind and the runway in use (AIM 4-1-9 h). If nobody answers, choose the runway from the wind and the pattern traffic you can hear.
- YouClinton Field traffic, Cessna Six Zero Foxtrot, entering left downwind runway zero three, full stop, Clinton Field.
- YouClinton Field traffic, Cessna Six Zero Foxtrot, left base runway zero three, Clinton Field.
- YouClinton Field traffic, Cessna Six Zero Foxtrot, final runway zero three, full stop, Clinton Field.
- YouClinton Field traffic, Cessna Six Zero Foxtrot, clear of runway zero three, Clinton Field.
If things change. Want flight following after departure? Call Columbus Approach on 118.85 once clear of the pattern: identification, type, position, altitude, destination, "request VFR flight following" (AIM 4-1-18 a 3). Do not use "any traffic in the area, please advise"; the AIM says it is not to be used under any condition (AIM 4-1-9 g 1).
Phraseology from AIM 4-1-9 c 1, g 1, g 8, h; TBL 4-1-1; 4-3-3. What TowerTalk grades against →
The calls you will make here
Nearby in Ohio
- KILNWilmington Air Parktowered
- 2B6Hollister Fieldnon-towered
- 40IRed Stewart Airfieldnon-towered
- KGDKGreene County/Lewis a Jackson Regionalnon-towered
- KMGYDayton/Wright Brothersnon-towered
- I68Warren County/John Lane Fieldnon-towered
Frequencies, runways and airspace from the FAA National Airspace System Resources (NASR) 28-day subscription, cycle effective Sep 3, 2026. Training use only. Always verify against a current Chart Supplement and sectional chart before flight; frequencies change. TowerTalk is not affiliated with the FAA. Report a discrepancy.
This page is in release tier 2 and is not yet submitted to search engines.
