Non-towered · Class G at the surface
Arledge Field (F56) radio calls
Stamford, TXFAA identifier F56; no ICAO code assigned
Arledge Field is a non-towered airport in Stamford, TX. Nobody clears you to do anything: you self-announce on the CTAF, 122.8, as Arledge Field Traffic, with the airport name at the start and end of each call. The approach control for the area is Abilene Approach on 127.2, which is who you call for VFR flight following.
No Class B, C, D or E surface area is designated for this airport in the FAA data, so the airspace at the surface is Class G.
Frequencies
| CTAFArledge Field Traffic | 122.8 |
|---|---|
| Approach / DepartureAbilene Approach | 127.2 |
Airport
- Runways
- 08 · 26 · 13 · 31 · 17 · 35
- Elevation
- 1,561 ft
- Position
- 32.910, -99.734
Non-towered airport: self-announce on the CTAF
Sample calls at F56
Arledge Field has no operating control tower. Every call below goes out on the CTAF, 122.8, to the other aircraft, not to a controller. The runway shown is 08; use whichever runway the wind and the traffic dictate on the day.
The aircraft is the AIM’s own example, Cessna Three One Six Zero Foxtrot; the squawk codes, altitudes and headings are illustrative. Frequencies, station names and runway numbers are this airport’s, from the FAA data.
- Tune 122.8. Nobody clears you; you announce and you listen. The airport name goes at the start and the end of every call, and the runway is always a number, never "the active" (AIM 4-1-9 g 8).
- YouArledge Field traffic, Cessna Three One Six Zero Foxtrot, taxiing to runway zero eight, Arledge Field.
- YouArledge Field traffic, Cessna Six Zero Foxtrot, departing runway zero eight, departing the pattern to the north, Arledge Field.
- Announce until you are about 10 miles out; on the way back, start announcing at 10 miles (AIM 4-1-9 c 1, TBL 4-1-1).
- YouArledge Field traffic, Cessna Three One Six Zero Foxtrot, one zero miles south, two thousand five hundred, landing Arledge Field, Arledge Field.
- YouArledge Field UNICOM, Cessna Six Zero Foxtrot, one zero miles south, request wind and runway information, Arledge Field.
- A UNICOM operator, if one is on, answers with the wind and the runway in use (AIM 4-1-9 h). If nobody answers, choose the runway from the wind and the pattern traffic you can hear.
- YouArledge Field traffic, Cessna Six Zero Foxtrot, entering left downwind runway zero eight, full stop, Arledge Field.
- YouArledge Field traffic, Cessna Six Zero Foxtrot, left base runway zero eight, Arledge Field.
- YouArledge Field traffic, Cessna Six Zero Foxtrot, final runway zero eight, full stop, Arledge Field.
- YouArledge Field traffic, Cessna Six Zero Foxtrot, clear of runway zero eight, Arledge Field.
If things change. Want flight following after departure? Call Abilene Approach on 127.2 once clear of the pattern: identification, type, position, altitude, destination, "request VFR flight following" (AIM 4-1-18 a 3). Do not use "any traffic in the area, please advise"; the AIM says it is not to be used under any condition (AIM 4-1-9 g 1).
Phraseology from AIM 4-1-9 c 1, g 1, g 8, h; TBL 4-1-1; 4-3-3. What TowerTalk grades against →
The calls you will make here
Nearby in Texas
- 15FHaskell Municipalnon-towered
- T23Albany Municipalnon-towered
- T60Stonewall Countynon-towered
- KABIAbilene Regionaltowered
- F75Harrison Field of Knox Citynon-towered
- 72FThrockmorton Municipalnon-towered
Frequencies, runways and airspace from the FAA National Airspace System Resources (NASR) 28-day subscription, cycle effective Sep 3, 2026. Training use only. Always verify against a current Chart Supplement and sectional chart before flight; frequencies change. TowerTalk is not affiliated with the FAA. Report a discrepancy.
This page is in release tier 2 and is not yet submitted to search engines.