Non-towered · Class G at the surface
Russellville-Logan County (4M7) radio calls
Russellville, KYFAA identifier 4M7; no ICAO code assigned
Russellville-Logan County is a non-towered airport in Russellville, KY. Nobody clears you to do anything: you self-announce on the CTAF, 122.7, as Russellville-Logan County Traffic, with the airport name at the start and end of each call.
No Class B, C, D or E surface area is designated for this airport in the FAA data, so the airspace at the surface is Class G.
Frequencies
| CTAFRussellville-Logan County Traffic | 122.7 |
|---|
Airport
- Runways
- 07 · 25
- Elevation
- 692 ft
- Position
- 36.800, -86.811
Non-towered airport: self-announce on the CTAF
Sample calls at 4M7
Russellville-Logan County has no operating control tower. Every call below goes out on the CTAF, 122.7, to the other aircraft, not to a controller. The runway shown is 07; use whichever runway the wind and the traffic dictate on the day.
The aircraft is the AIM’s own example, Cessna Three One Six Zero Foxtrot; the squawk codes, altitudes and headings are illustrative. Frequencies, station names and runway numbers are this airport’s, from the FAA data.
- Tune 122.7. Nobody clears you; you announce and you listen. The airport name goes at the start and the end of every call, and the runway is always a number, never "the active" (AIM 4-1-9 g 8).
- YouRussellville-Logan County traffic, Cessna Three One Six Zero Foxtrot, taxiing to runway zero seven, Russellville-Logan County.
- YouRussellville-Logan County traffic, Cessna Six Zero Foxtrot, departing runway zero seven, departing the pattern to the north, Russellville-Logan County.
- Announce until you are about 10 miles out; on the way back, start announcing at 10 miles (AIM 4-1-9 c 1, TBL 4-1-1).
- YouRussellville-Logan County traffic, Cessna Three One Six Zero Foxtrot, one zero miles south, two thousand five hundred, landing Russellville-Logan County, Russellville-Logan County.
- YouRussellville-Logan County UNICOM, Cessna Six Zero Foxtrot, one zero miles south, request wind and runway information, Russellville-Logan County.
- A UNICOM operator, if one is on, answers with the wind and the runway in use (AIM 4-1-9 h). If nobody answers, choose the runway from the wind and the pattern traffic you can hear.
- YouRussellville-Logan County traffic, Cessna Six Zero Foxtrot, entering left downwind runway zero seven, full stop, Russellville-Logan County.
- YouRussellville-Logan County traffic, Cessna Six Zero Foxtrot, left base runway zero seven, Russellville-Logan County.
- YouRussellville-Logan County traffic, Cessna Six Zero Foxtrot, final runway zero seven, full stop, Russellville-Logan County.
- YouRussellville-Logan County traffic, Cessna Six Zero Foxtrot, clear of runway zero seven, Russellville-Logan County.
If things change. Do not use "any traffic in the area, please advise"; the AIM says it is not to be used under any condition (AIM 4-1-9 g 1). Listen for ten miles before you arrive; most of what you want to know has already been said.
Phraseology from AIM 4-1-9 c 1, g 1, g 8, h; TBL 4-1-1; 4-3-3. What TowerTalk grades against →
The calls you will make here
Nearby in Kentucky
- KBWGBowling Green-Warren County Regionalnon-towered
- M21Muhlenberg Countynon-towered
- KHVCHopkinsville-Christian Countynon-towered
- KJQDOhio Countynon-towered
- KGLWGlasgow Municipalnon-towered
- 2I0Madisonville Regionalnon-towered
Frequencies, runways and airspace from the FAA National Airspace System Resources (NASR) 28-day subscription, cycle effective Sep 3, 2026. Training use only. Always verify against a current Chart Supplement and sectional chart before flight; frequencies change. TowerTalk is not affiliated with the FAA. Report a discrepancy.
This page is in release tier 2 and is not yet submitted to search engines.