Non-towered · Class G at the surface
Robbins Field (20A) radio calls
Oneonta, ALFAA identifier 20A; no ICAO code assigned
Robbins Field is a non-towered airport in Oneonta, AL. Nobody clears you to do anything: you self-announce on the CTAF, 122.8, as Robbins Field Traffic, with the airport name at the start and end of each call. The approach control for the area is Birmingham Approach on 125.45, which is who you call for VFR flight following.
No Class B, C, D or E surface area is designated for this airport in the FAA data, so the airspace at the surface is Class G.
Frequencies
| CTAFRobbins Field Traffic | 122.8 |
|---|---|
| Approach / DepartureBirmingham Approach | 125.45 |
Airport
- Runways
- 06 · 24
- Elevation
- 1,125 ft
- Position
- 33.971, -86.380
Non-towered airport: self-announce on the CTAF
Sample calls at 20A
Robbins Field has no operating control tower. Every call below goes out on the CTAF, 122.8, to the other aircraft, not to a controller. The runway shown is 06; use whichever runway the wind and the traffic dictate on the day.
The aircraft is the AIM’s own example, Cessna Three One Six Zero Foxtrot; the squawk codes, altitudes and headings are illustrative. Frequencies, station names and runway numbers are this airport’s, from the FAA data.
- Tune 122.8. Nobody clears you; you announce and you listen. The airport name goes at the start and the end of every call, and the runway is always a number, never "the active" (AIM 4-1-9 g 8).
- YouRobbins Field traffic, Cessna Three One Six Zero Foxtrot, taxiing to runway zero six, Robbins Field.
- YouRobbins Field traffic, Cessna Six Zero Foxtrot, departing runway zero six, departing the pattern to the north, Robbins Field.
- Announce until you are about 10 miles out; on the way back, start announcing at 10 miles (AIM 4-1-9 c 1, TBL 4-1-1).
- YouRobbins Field traffic, Cessna Three One Six Zero Foxtrot, one zero miles south, two thousand five hundred, landing Robbins Field, Robbins Field.
- YouRobbins Field UNICOM, Cessna Six Zero Foxtrot, one zero miles south, request wind and runway information, Robbins Field.
- A UNICOM operator, if one is on, answers with the wind and the runway in use (AIM 4-1-9 h). If nobody answers, choose the runway from the wind and the pattern traffic you can hear.
- YouRobbins Field traffic, Cessna Six Zero Foxtrot, entering left downwind runway zero six, full stop, Robbins Field.
- YouRobbins Field traffic, Cessna Six Zero Foxtrot, left base runway zero six, Robbins Field.
- YouRobbins Field traffic, Cessna Six Zero Foxtrot, final runway zero six, full stop, Robbins Field.
- YouRobbins Field traffic, Cessna Six Zero Foxtrot, clear of runway zero six, Robbins Field.
If things change. Want flight following after departure? Call Birmingham Approach on 125.45 once clear of the pattern: identification, type, position, altitude, destination, "request VFR flight following" (AIM 4-1-18 a 3). Do not use "any traffic in the area, please advise"; the AIM says it is not to be used under any condition (AIM 4-1-9 g 1).
Phraseology from AIM 4-1-9 c 1, g 1, g 8, h; TBL 4-1-1; 4-3-3. What TowerTalk grades against →
The calls you will make here
Nearby in Alabama
- KGADNortheast Alabama Regionalnon-towered
- KBFZAlbertville Regional/Thomas j Brumlik Fieldnon-towered
- KPLRSt Clair Countynon-towered
- 8A1Guntersville Municipal/Joe Starnes Fieldnon-towered
- KASNTalladega Municipalnon-towered
- KCMDCullman Regional/Folsom Fieldnon-towered
Frequencies, runways and airspace from the FAA National Airspace System Resources (NASR) 28-day subscription, cycle effective Sep 3, 2026. Training use only. Always verify against a current Chart Supplement and sectional chart before flight; frequencies change. TowerTalk is not affiliated with the FAA. Report a discrepancy.
This page is in release tier 2 and is not yet submitted to search engines.
